How To Solve BMW ICOM NEXT Cannot Find IP Address
How To Solve BMW ICOM NEXT A+B+C Cannot Find IP Address
When you use BMW ICOM A+B+C diagnostic head with ICOM ISTA-P/D software, but the IP address cannot be found, how to solve this problem?
Here is the suggestion from a professional technician working at obd2.ltd.
If you have the same problem, you can try to set ICOM WLAN.
Step 1: Open Itool Radar to identify the BMW ICOM info
Step 2: Acess the BMW ICOM configuration url through IE
Here take IP address: http://169.254.33.45:58000/ as an example,the address is subject to the actual reading.
Step 3: Select WLAN Settings and enter the corresponding available WiFi info
Confirm the info entered and click Save Changes to save
Step 4: Disconnect the network cable and power supply, then restart ICOM
Wifi will be connected automatically when starting ICOM
Note: If you use our sotware and USB- WiFi, the ICOM configuration info is:
Mode: 802.11n, 2.4GHz
SSID: ISAP
Security Type: WPA2 Personal
Pre-shared key: BmwAp24h
