MB Star C6 Diagnostic and Programming Tool OEM C6 DoIP with V2024.03 Xentry Software for Mercedes Benz Vehicles till 2024

MB Star C6 Diagnostic and Programming Tool OEM C6 DoIP with V2024.03 Xentry Software for Mercedes Benz Vehicles till 2024

Notice:
If you choose hardware and software（320G HDD or 256G SSD）
1. Please install the 320GB HDD(256G SSD) on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
2. There is keygen in our software HDD(SSD), no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can't support All Key Lost,needs one key at least.

WIFI PASSWORD : 12345678

Please pay attention :
This device cant work with C4 or C5 software , only can use our C6 software , if you dont have software , please buy our software together when you make the order

MB Star C6 Software Description：
1.DAS / Xentry V2024.03 :
Xentry：the automatically Diagnosis Assistance System
DAS: New software released by Benz Company after 04/2009 by diagnosis new cars.
2.WIS net 2021.07: Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram, and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration, and the car model -all in detail.
3.EPC net 2018.11: Electronic Parts Catalog
4.ST Finder  2020, StarFinder : 2022，StarFinder : 2008  optional: a Part location finder
5.SDmedia 2015.01
6.This C6 hardware not support Vediamo
7.DTS 9.02 + DTS8.13: Engineering software for offline programming
1) Fix the error that Mercedes-Benz DAS cannot directly call WIS
2) Join the DAS sedan smart offline programming
3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo
4) Join DAS special function password-free access PKW and SMART
5) Repair SMART 450, 451, 452, 454 No longer need TAN Calculator, all offline
6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit
7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function
8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter it directly
9) Add DAS 212，207 prototyp model
10) Add Xentry special features and the VeDoc calculator ($30 for activation)

What is DOIP?
DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes  Land Rover JLR all use this new Diagnostic Protocol now.

Where do you need DOIP device?
when we test mercedes new car like w222  w205

In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Features:
Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

MB Star C6 Xentry diagnosis VCI DoIP Pass-thru interface Supported Vehicle List:
MB SD C6 Support Mercedes Benz Cars After the Year 2010

Passenger Car Support List:
A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126),
E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197),
M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216),
CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)

Super Sports Car Support List:
SLR(199) etc.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
 
The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Packing List:
Option 1:
C6 Doip With Full Mercedes software （320G HDD）
Package List:
1pc x C6 Multiplexer
1pc x OBDII 16Pin Cable
1pc x USB Cable
1pc x Use manual
1pc x 320G HDD (All system ready to use)
Please install the 320GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.There is keygen in our software HDD, no need activation by us.

Option 2:
C6 Doip With Full Mercedes software (256G SSD)
Package List:
1pc x C6 Multiplexer
1pc x OBDII 16Pin Cable
1pc x USB Cable
1pc x Use manual
1pc x 256G SSD (All system ready to use)
Please install the 256GB SSD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.There is keygen in our software SSD, no need activation by us.

Option 3:
C6 Doip+ Lenovo T450 Laptop With Full Mercedes software:
Package List:
1pc x C6 Multiplexer
1pc x OBDII 16Pin Cable
1pc x USB Cable
1pc x Use manual
1set x Second Hand Laptop Lenovo T450 i5 8G (All software activated. All system ready to use)

Option 4:
C6 Doip+ Panasonic FZ-G1 I5 8G Tablet With Full Mercedes software:
Package List:
1pc x C6 Multiplexer
1pc x OBDII 16Pin Cable
1pc x USB Cable
1pc x Use manual
1set x Second Hand Panasonic FZ-G1 I5 8G Tablet (All software activated. All system ready to use)