LAUNCH X431 PRO ELITE Car Diagnostic Tool OBD2 Scanner CANFDDOIP Active Test 32 Reset Functions
LAUNCH X431 PRO ELITE is 2024 new released all-in-one automotive car diagnostic scan tool, comes with Full Bi-directional Control, 32+ Maintenance Services, OE All Systems Diagnostics, FCA AutoAuth, CANFD DOIP, VAG Guided, Refresh Hidden Functions, Fast Auto Vin, Remote Control, 10,0000+ Vehicle Coverage, 25 languages and Optional Functions: High-end Complete TPMS Functions(Need to work with x431 tsgun); Advanced Key Programming (Need to work with x-prog 3) and more extension modules. At a lower cost, Launch obd2 scanner X431 PRO ELITE combines all the hot functions of comprehensive scanners according to the customer's favorite need.
ADVANCED OE-LEVEL FUNCTIONS: Guided Functions + AutoAuth for FCA SGW + Power Balance + Component Matching + Flash Hidden Functions + ECU Coding + Anti-theft IMMO Service + Setting & Changeover +Modification +Initialization+Adaptation+ Matching+ +Customization + Personalization
LAUNCH X431 PRO ELITE Highlights
1.Supports CAN FD and DoIP New Protocols
2.8’inch LED touchscreen , Android 10.0, 2.0Ghz 4-core processor, 4GB RAM+64GB ROM large storage
3.6000mAh Battery, High endurance, faster, more stable, and long-lasting operation
4.OE-Level Professional Car Full System Diagnosis
5.Full Bi-Directional Control ( Active Test ) + 32+ Reset Service functions
6.Support VAG Guide Function + ECU Coding
7.Support OBFCM
8.2 Years Free Update. After that, you can still use it, it will not be locked. $199 per year later.
9.Multi-Language Free Choose, No language barrier
10.Support remote diagnose
11.Support Auto VIN Scan + Intelligent diagnostics + Remote Diagnostics + Diagnostic Feedback
12.Compatible with X-PROG 3 to perform anti-theft programming
13.Compatible with TSGUN and RF-Sensor to To activate, program, learn, and detect tire pressure
14.Compatible with BST360, VSP600, ADAS, X-Prog3, WIFI Printer, SensorBox, Oscilloscope, Launch x431 key programmer, IMMO Software package add-on module etc.
NOTE:
Pro Elite supports USB connection Only. If need a wireless scanner with same function go for CRP919 BT (USB/Bluetooth).
Pro Elite has the same function as ProS Elite.
Launch X431 Pro Elite vs CRP919E/CRP919X BT
CRP919X/CRP919E BT: With DBScar 7, Bluetooth connection, full system diagnostic, ECU coding and 31 special functions.
Pro Elite: USB connection only, full diagnostic, 31 special functions, it also supports many add-on modules, TPMS, X-prog3, VSP600, SensorBox, Oscilloscope etc, CRP series does not support these modules.
25 Language Supports
English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Czech, Turkish, Greek, Arabic, Danish, Romanian, Serbian, Swedish, Traditional Chinese, Thai, Persian, Simplified Chinese.
Launch X431 Pro Elite Functions:
Bi-directional Control （Active Test）
Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.
OE- Level Full System Diagnosis
This LAUNCH diagnostic scanner can establish a data link to all systems and subsystems of the vehicle being serviced to:
-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
-Read & erase DTCs to locate problem areas and clear the codes.
-View Live Data of each parameter item.
The following is a list of modern vehicle systems that this scan tool can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.
ECU Coding
The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc.
LAUNCH X431 PRO ELITE has advanced ECU Coding& Online Coding function to cover more car models, including the old & new models without extra cost. With the ECU coding function, it can to Match, learn, or code the newly replaced ECU, update the vehicle ECU software, refresh hidden features to disable annoying functions, like disabling seat belt beep, and daylight running light, and Match certain components after repairs or replacements and Reprograms the adaptive data for certain components after repairs or replacements and help professional mechanics/technicians to do vehicle repairs. Customize the cars fast, have greater work efficiency, and meet customer needs.
Online ECU Coding: This LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.
Offline ECU Coding: Read the code from the original module, and then write the code for the new module.
But please note that ecu coding is not suitable for all vehicles, please check the compatibility with VIN number before purchasing.
32+ commonly used repair & maintenance services, keep creasing
1. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2. TPMS Reset
When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
3. Oil Lamp Reset
Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.
4. Electronic Throttle Sensor Reset
To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
5. Injector Coding
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
6. SAS Reset
It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.
7. Brake-pad Reset
To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
8. Gear Learning
Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
9. IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
10. Battery Matching
Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.
11. DPF Regeneration
It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.
12. EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.
13. Suspension Matching
When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.
14. NOx Sensor Reset
If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
15. Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16. Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory.
17. Stop-start Reset
This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)
18. AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
19. AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.
20. AFS Headlamp Reset
This function enables you to initialize the adaptive headlamp system.
21. A/F Reset
This function is applied to set or learn air/fuel rate parameters.
22. Gearbox Reset
This function enables you to complete the gearbox self-learning to improve gear shifting quality
23. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
24. Transport Reset
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.
25. Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
26. High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status information detection.
27. Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.
28. Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
29. Language Change
This function is used to change system language of vehicle center console. note:you need to have language pack to do language change
30. Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resul
31. Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.
(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)
More Functions Supports
1. Support automatic VIN code identification
2. Share Report via Wi-Fi & print Report
3.12-in-1 Live Data in Graphic
4. Measure the current voltage of the vehicle’s battery.
5. Support automatic generation of diagnostic report and upload
6. Diagnostic Report & Online Feedback
and more
Cover 99% Global Car 100000+ Vehicles Supports
150+ Car Brands,100000+ Car Models Supported!
√CANFD Protocol Supported- Compatible with GM models (2020 and later).(No need to buy adapters.)
√DOIP Protocol Supported- Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).(No need to buy adapters.)
√FCA AUTOAUTH-For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): You can Register with AutoAuth to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
America Car Models: For FORD, LINCOLN, GM, BUICK, CADILLAC, CHEVROLET, CHRYSLER, DODGE, JEEP, HM, For MERCURY, For PONTIAC, For SATURN, For TESLA;
Europe Car Models: For BENZ, SMART, SPRINTER, BMW, VW, SKODA, A-UDI, OPEL, LAMBORGHINI, PORSCHE, MAYBACH, EURO FORD, LANDROVER, DR, BENTLEY, ROVER, MINI, VAUXHALL, FERRARI, FIAT, LANCIA, ALFA, ROMEO, MASERATI, BUGATTI, For PEUGEOT CITROEN, RENAULT, SAAB, VOLVO, OPEL, DACIA, SEAT, ABARTH, For RENAULT, For ROLLS-ROYCE, For SAAB, For SKODA, For SMART, For VOLVO;
Asia Car Models: For Acura, For DAEWOO, For HOLDEN, For HONDA, For HYUNDAI, For INFINITI, For ISUZU, For KIA, For LEXUS, For MAZDA, For MITSUBISHI, For NISSAN, For SCION, For SSANGYONG, For SUBARU, For SUZUKI, For TOYOTA, For BYD, For CHERY;
Malaysia Car Models: For PERODUA(PERODUA), PROTON ;
IRAN Car Models: For IKCO, MVM, SAIPA;
Australian Car Models: For AUSFORD, For HOLDEN ;
India Car Models: For TATA, MARUTI, MAHINDRA, INDIA HM ;
Russia Car Models: For GAZ, For VAZ;
Brazil Car Models: For FIAT; For GM;
Added Functions, More Extended Functions Make Work Easier
1.ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
2.For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH X431 PRO ELITE tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
3.VAG Guided Functions for Audi, Volkswagen Skoda and Seat, etc: On-Screen Instruction step by step, LAUNCH X431 PRO ELITE Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function, you don't need to rely on a mechanic’s suggestion all the time. **NO extra costs to use the VAG Guided Functions on LAUNCH X431 PRO ELITE.
4.Open the Hidden Features: Make full use of hidden features or disable the car’s annoying functions. 3-Time Flasher Setting, Auto L ock/Unl ock Function, one-touch signal flickers, deactivate some buzzing sounds, needle sweep,rear-view mirror folding, disable daytime running light, disable seat belt alarm beep, remove maximum speed limiter,etc.
5.(PMI) Programmable Module Installation: LAUNCH X431 PRO ELITE Support PMI function, Compatible with Ford /Lincoln/ Mazda etc. This function is used when you need to replace a module (replace E~CU) or initialize a module. No need to use the J2534 or buy a subscription
6.Power balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power, or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing is one of the best and easiest ways to find the source of an engine misfire. Furthermore, cylinder power balance testing is often used along with cylinder compression and cylinder leakage tests to further pinpoint the problem.
7.Key Programming: Add, Delete & Reprogram Keys, Rewrite smart k eys, Replace smart key E~CU, Replace KNOB IGNITION; Reset Key: Relearn a key.
8.Tons of Actuator Test (Functional Test): Turn ON/OFF Front and Rear side ACM Solenoid, turning the fuel pump on and off, cycle the a/c, clutch on and off, Left clutch electromagnetic co il test, Acceleration Device Test, Oil Pressure Control Test, DYNAMIC camera aiming, Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Botors, Wheel Speed Sensor Supply, PARKING BRAKE tests (Vary by car, Hundreds of actuation test functions)
LAUNCH X431 PRO ELITE is compatible with more module functions
1.LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, programming Launch Sensors, monitoring TPMS health status, etc.
2.LAUNCH BST360 Battery Tester: Connecting with this battery tester, X431 PRO ELITE is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc., which help you to detect battery-related issues of vehicles accurately and timely.
3.LAUNCH VSP600 Videoscope: Make X431 PRO ELITE a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
4.LAUNCH X431 X-PROG3: Achieve diagnostic functions such as vehicle k ey, Engine, and gearbox programming for various vehicles.
5.X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems.
6.S2-2 SensorBox-To simulate vehicle sensor faults (EXTRA BUY);
7.O2-1 ScopeBox Oscilloscope-To quickly acquire circuit signals (EXTRA BUY);
8.O2-2 ScopeBox Oscilloscope-To analyzes data for all kinds of the testing applications on the automotive parts (including circuits, sensors,actuators, ignition etc.)(EXTRA BUY);
9.LAUNCH X431 Wi-Fi Printer: X431 PRO ELITE can be connected to WIFI printers to print out diagnostic data or reports.
10.Launch X431 Key programmer: generate chip, copy chip, generate remotes etc
IMMO Software Package: Advanced IMMO key programming with X-prog3
The difference between X431 PRO ELITE and X431 V 4.0
Package List：
1pc x tablet
1pc x AC adapter
1pc x Main cable
1pc x USB cable
1pc x UK plug
1pc x US plug
1pc x EU plug
1pc x user manual
1pc x quick guide
1pc x packing list
1pc x password bar
